OVER 100 UNITS SOLD!
This is a kit to make your very own wifi openhab mqtt controlled Door Sensor.
Both the DIY Kit and Assembled device come with MK-DoorSensor firmware version 2 installed so all you have to do is connect it to your server using your mobile phone.
Included in this kit:
|
2 pin Terminal |
x2 |
|
4 Pin Female Header |
x1 |
|
3 Pin Male Header |
x1 |
|
2 pin Jumper |
x1 |
|
10K Resistor |
x1 |
|
5v to 3.3v Regulator |
x1 |
|
ESP8266 |
x1 |
|
PCB |
x1 |
|
Plastic enclosure |
x1 |
|
Magnetic Switch Sensor |
x1 |
|
2 Conductor 22 Guage Cable |
x1 |
|
Male USB Connector |
x1 |
|
Wall Tac |
x1 |
|
Screws |
x2 |
Please also note: If you would like this kit put together for you, so all you have to do is plug it in and connect it to your OpenHAB or Home Assistant server then click the Assembled option in the drop down.